Cite this article
  •    [Click To Copy]
  •    [Click To Copy]
【Print This Page】 【Download PDF Full Text】 View/Add CommentDownload reader Close

←Previous Article|Next Article→

Back Issue    Advanced Search

This Article Has Been:Browse 1749 Times   Download 1886 Times QR code information in this article
Scan Up The Code!
干燥褐煤的热泵技术实验研究
盛伟1, 郑海坤1, 张保森2
0
(1.河南理工大学机械学院;2.河南理工大学机械学院,昊华宇航化工有限责任公司)
摘要:
结合目前国内电厂循环水余热利用及褐煤干燥现状,提出了利用热泵技术回收电厂循环水余热干燥褐煤的实验方案,并搭建了实验系统。分别在60℃、 70℃、80℃条件下对褐煤进行了干燥实验,测定了褐煤质量随时间变化曲线。实验结果表明:干燥温度越高,干燥速率越快,有效干燥时间越长,干燥效果越好。在60℃的条件下脱水量为22.5%,耗时25min;70℃时为31%,耗时30min;80℃最高可达到42.6%,耗时35min。为热泵技术在循环水余热利用以及褐煤干燥中的实际应用提供参考。
关键词:  热泵  褐煤  干燥  余热利用  循环水
DOI:
Received:August 06, 2012
基金项目:
Experimental Study on Drying Lignite by Heat Pump
Sheng Wei1, Zheng Haikun1, Zhang Baosen1,2
(1.College of mechanical and power engineering, Henan Polytechnic University;2.Haohua Yuhang chemical limited liability company)
Abstract:
An experimental scheme is proposed to recover the waste heat of power plant circulating water to dry lignite with heat pump, and the experiment system was developed. Experiments of drying lignite in the temperature of 60℃, 70℃and 80℃ were conducted, and the change of lignite quality with time was measured. The result shows that: the higher the temperature ,the faster drying rate; the longer the effective drying time ,the better the result. Drying 22.5% water at the temperature of 60℃ takes time 25 min; 30.5%-31.5% at 70℃takes 30 min; 42.6% at 80℃ takes 35 min. This paper provides a reference for the practical application of heat pump in the utilization of waste heat of circulating water for drying lignite.
Key words:  heat pump  lignite  dry  utilization of waste heat  circulating water

用微信扫一扫

用微信扫一扫