引用本文
  •    [点击复制]
  •    [点击复制]
【打印本页】 【下载PDF全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 1971次   下载 2404 本文二维码信息
码上扫一扫!
新型电动汽车热泵系统除湿再热性能实验研究
程恰, 周国梁, 兰娇, 唐启天
0
(上海理工大学能源与动力工程学院)
摘要:
本文设计了一种具备两种除湿再热模式的电动汽车热泵系统,在不同实验工况下研究了两种除湿再热模式的除湿性能与再热性能。结果表明:热泵系统的功耗低于2.0 kW,COP大于2.0;除湿再热模式A的除湿率为0.41~0.83 kg/h,制热量为1.7~3.0 kW;除湿再热模式B的除湿率为0.25~0.55 kg/h,制热量为2.0~3.4 kW。因此除湿再热模式A具备良好的除湿性能,除湿模式B具备良好的再热性能;根据两种除湿再热模式的特点,提出一种既能满足乘员舱除湿供暖要求,又能相对节能的运行策略。
关键词:  汽车空调  热泵  除湿  性能系数
DOI:
投稿时间:2017-09-12    
基金项目:上海市重点学科建设(S30503)项目资助。
Experimental Research on Dehumidifying and Reheating Characteristics of a Novel Heat Pump System for Electric Vehicle
Cheng Qia, Zhou Guoliang, Lan Jiao, Tang Qitian
(School of Energy and Power Engineering, University of Shanghai for Science and Technology)
Abstract:
In this study, a heat pump system with two dehumidifying and reheating modes for electric vehicles was set up, and the operating characteristics of the heat pump system were compared in two dehumidifying and reheating modes under various test conditions. Test results showed that energy consumption of the heat pump system was below 2.0 kW, and COP was above 2.0 under all test conditions. The dehumidifying and reheating mode A has better dehumidification performance with moisture extraction rate ranging from 0.41-0.83 kg/h and heating capacity ranging from 1.7-3.0 kW, while dehumidifying and reheating mode B has better reheating performance, with moisture extraction rate ranging from 0.25-0.55 kg/h and heating capacity ranging from 2.0-3.4 kW. Based on the characteristics of two modes, an energy saving strategy was proposed as a possible option for realization of energy conservation without sacrifice of thermal comfort for passengers.
Key words:  automotive air-conditioning  heat pump  dehumidification  coefficient of performance

用微信扫一扫

用微信扫一扫