| 摘要: |
| 将不同形状的波纹翅片与无接触热阻技术结合研制了波纹型无接触热阻换热器，并利用CFD仿真软件进行对比分析尖角波纹翅片和圆角波纹翅片空气侧换热性能及阻力特性，寻找较好的翅片形状。按照仿真结果生产无接触热阻尖角波纹翅片空调换热器实验样件，进行实验测试，实验结果表明：翅片表面换热系数仿真结果与实验结果较为一致，整体误差在10%以内，仿真结果能基本反映翅片表面的实际换热情况。引入强化传热指标，通过仿真结果计算可知，在不同风速下强化传热指标DEC均大于1，说明尖角波纹翅片的传热效果优于圆角波纹翅片。 |
| 关键词: 无接触热阻 波纹翅片 强化传热 |
| DOI： |
|
|
| 基金项目: |
|
| Performance Research of Air-conditioning Heat Exchanger Without Heat Contact Resistance |
|
Wang Rui1, Feng Chaoqing1,2, Wang Yichun2
|
| (1.Inner Mongolia University of Technology;2.School of Mechanical and Vehicular, Beijing Institute of Technology) |
| Abstract: |
| Combined the without heat contact resistance technology with different corrugated fins, the new kinds of fin has been developed. The surface heat transfer coefficient and friction coefficient of fins was calculated by CFD software in order to find the different between sharp corner corrugated fins and rounded corner corrugated fins. The sample of heat exchanger was made and the performance was tested in wind tunnel experimental system. Compared the simulation and experiment result, we found that they have good consistency and the errors between them are less than 10%. The simulation result can reflect the real heat transfer situation between the fins of exchanger. Evaluation of heat transfer enhancement was adopted. The result showed that the DEC always bigger than 1 in different wind speed, so the performance of sharp corner corrugated fins is better than rounded corner corrugated fins. |
| Key words: without heat contact resistance corrugated fins heat transfer enhancement |
