引用本文
  •    [点击复制]
  •    [点击复制]
【打印本页】 【下载PDF全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 1608次   下载 337 本文二维码信息
码上扫一扫!
跨临界CO2汽车空调微通道气体冷却器的设计开发
邓建强,姜培学,石润富,李建明
0
([1]清华大学热能动力工程与热科学重点实验室,北京100084 [2]苏州三川换热器有限公司,苏州215101)
摘要:
基于平均温差法,调用REFPROP7.0确定超临界CO2剧烈变化的热物性,采用迭代方法对紧凑式微通道气体冷却器进行设计.选用近期发表的两个超临界CO2管内换热计算关联式进行设计计算,结果表明二者对气体冷却器的设计影响不大;CO2侧压降计算表明压降很小.文章阐述了有关试制工艺.
关键词:  热工学  气体冷却器  设计  微通道
DOI:
  修订日期:2004-11-24  
基金项目:
Development of Microchannel Gas Cooler for Trans-critical CO2 Automotive Air Conditioning
Abstract:
A modified design calculation program was developed for gas coolers using the mean temperature difference method.Since the variable thermophysical properties of supercritical CO_2 significantly influence the convection heat transfer in tubes,the thermodynamic and transport properties of supercritical CO_2 used in the calculations were determined with REFPROP7.0.The two most recent published correlations for in-tube cooling were also used in the program.The results show no notable difference between the two correlations.The in-tube pressure drop predicted is also quite small.
Key words:  Pyrology,Gas cooler,Design,Microchannel,

用微信扫一扫

用微信扫一扫