套片式翅片管机械胀接接触热阻分析与模拟优化

李思思; 欧阳新萍; 夏荣鑫; 李冬磊

doi:10.3969/j.issn.0253-4339.2020.03.038

您当前的位置：

首页 >

文章列表页 >

套片式翅片管机械胀接接触热阻分析与模拟优化

更新时间：2024-07-18

- 套片式翅片管机械胀接接触热阻分析与模拟优化
- Thermal Resistance Analysis and Numerical Optimization of Mechanical Expanded Tube-to-Fin Joints
- 制冷学报 2020年41卷第3期
- 作者机构：
  
  上海理工大学制冷及低温工程研究所
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0253-4339.2020.03.038
  中图分类号：
- 纸质出版日期：2020-01-01，
- 稿件说明：
移动端阅览
李思思, 欧阳新萍, 夏荣鑫, 等. 套片式翅片管机械胀接接触热阻分析与模拟优化[J]. 制冷学报, 2020,41(3).

LI SISI, OUYANG XINPING, XIA RONGXIN, et al. Thermal Resistance Analysis and Numerical Optimization of Mechanical Expanded Tube-to-Fin Joints. [J]. Journal of refrigeration, 2020, 41(3).
李思思, 欧阳新萍, 夏荣鑫, 等. 套片式翅片管机械胀接接触热阻分析与模拟优化[J]. 制冷学报, 2020,41(3). DOI： 10.3969/j.issn.0253-4339.2020.03.038.

LI SISI, OUYANG XINPING, XIA RONGXIN, et al. Thermal Resistance Analysis and Numerical Optimization of Mechanical Expanded Tube-to-Fin Joints. [J]. Journal of refrigeration, 2020, 41(3). DOI： 10.3969/j.issn.0253-4339.2020.03.038.

摘要

本文采用有限元模拟方法，得到套片式翅片管换热器机械胀接的翅片与基管间的胀后节点接触应力分布。提出模拟的总体接触应力并不是节点接触应力算术平均的观点和一种较为合理的计算方法。对一种套片式换热器试件进行传热性能实验以获取翅片与基管之间的接触热阻数值，由模拟计算的总体接触应力与实验接触热阻数值，计算两者的关联式。采用有限元模拟方法预测各种胀接量下的总体接触应力及最优的胀接尺寸，利用弹塑性理论计算对比模拟计算进行相互验证。结果发现，材料弹塑性理论计算结果与模拟计算结果的相对偏差为7.3%，偏差较小，证明两者均具有效性。

Abstract

The finite element simulation method was used to obtain the distribution of contact stress between the fin and the base pipe. It is proposed that the overall contact stress is not just the average value of the node contact stress

and a more reasonable method of calculation method is proposed. A heat transfer performance test of a sleeve-type heat exchanger was undertaken to determine the contact thermal resistance between the fin and the base pipe. The correlation between the overall contact stress and the contact thermal resistance was established. The finite element simulation method was used to determine the overall contact stress under various expansion factors

and to determine the optimal process dimension. Finally

the contact stress value calculated by the elastoplastic theory was used for internal verification. The relative deviation between the contact stress calculated using elastoplastic theory and the simulated value was small (7.3%).

关键词

机械胀接数值模拟接触热阻热电比拟优化设计

Keywords

mechanical expansionnumerical simulationcontact thermal resistancethermoelectric analogyoptimal design

references

浏览量

2250

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

动车组IGBT模块高效散热器设计

直冷式制冰机冰模蒸发器制冷剂侧模拟与优化

基于共晶水合盐改性材料的空调用填充床蓄冷特性研究