Cite this article
  •    [Click To Copy]
  •    [Click To Copy]
【Print This Page】 【Download PDF Full Text】 View/Add CommentDownload reader Close

←Previous Article|Next Article→

Back Issue    Advanced Search

This Article Has Been:Browse 2201 Times   Download 2032 Times QR code information in this article
Scan Up The Code!
储热型吸附式空气取水器吸附剂与储热材料的选择
刘金亚, 王丽伟, 王佳韵, 王如竹
0
(上海交通大学制冷与低温工程研究所)
摘要:
本文对太阳能储热型吸附式空气取水器吸附剂和储热材料的选择进行了研究。分别研究了以膨胀硫化石墨(ENG-TSA)和以活性炭纤维毡(ACF)为基质的复合吸附剂的导热系数和吸附性能,硬脂酸/膨胀硫化石墨(ENG-TSA-SA)复合相变储热材料的导热系数与DSC测试。结果表明:ENG-TSA-LiCl复合吸附剂的导热系数最大可达5.67 W/(m?K),吸水量最大可达1.54 g/g。真空浸渍法获得的ACF-LiCl复合吸附剂的吸水量比大气浸渍法高。ASLi40固化吸附剂的吸水量为1.59 g/g,适用于大批量生产。ENG-TSA-SA的径向导热系数为22.2 W/(m?K),相变温度区间为65.9~77.1 ℃,适用于太阳能等低品位热能。储热器的添加明显延缓了解吸温度降低的趋势。
关键词:  空气取水  复合吸附剂  相变材料  导热系数  太阳能
DOI:
Received:May 24, 2017
基金项目:
Alternatives to Sorbents and Heat Storage Materials for Heat Storage Sorption Air Intake
Liu Jinya, Wang Liwei, Wang Jiayun, Wang Ruzhu
(Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University)
Abstract:
Alternatives to the sorbents and heat storage materials used for a heat storage sorption air intake driven by solar energy were examined in this study. These included thermal conductivity and the sorption kinetic performance of composite sorbents using expanded natural graphite treated with sulfuric acid (ENG-TSA) and activated carbon fiber (ACF) felt as porous host matrixes, and thermal conductivity and differential scanning calorimetry (DSC) test for the composite phase-change thermal energy storage materials, i.e., stearic acid (SA)/ENG-TSA. The results revealed that the best thermal conductivity of the composite sorbent ENG-TSA-LiCl was 5.67 W/(m?K), and the largest water uptake was 1.54 g/g. The sorption performance of the composite sorbent ACF-LiCl using a vacuum impregnation method was better than that when using the atmospheric impregnation method. The water uptake of the consolidated sorbent of ASLi40 was 1.59 g/g, which can be applied to mass production. ENG-TSA-SA was suitable for solar energy and other low-grade heat energy recovery applications, with a high radial thermal conductivity (22.2 W/(m?K)) and appropriate internal phase transition temperature (65.9–77.1 ℃). The addition of a heat reservoir significantly slowed down the decrease to the desorption temperature.
Key words:  air intake  composite sorbent  phase change material  thermal conductivity  solar energy

用微信扫一扫

用微信扫一扫