Cite this article
  •    [Click To Copy]
  •    [Click To Copy]
【Print This Page】 【Download PDF Full Text】 View/Add CommentDownload reader Close

←Previous Article|Next Article→

Back Issue    Advanced Search

This Article Has Been:Browse 1970 Times   Download 2153 Times QR code information in this article
Scan Up The Code!
金属多孔介质泡沫自然对流换热实验研究
钱维扬, 潘阳, 彭招
0
(华东交通大学土木建筑学院)
摘要:
本文对饱和水-泡沫铜多孔介质在方腔内的自然对流换热进行了实验研究。讨论了孔隙率、孔隙密度及倾斜角度对多孔介质自然对流换热的影响。结果表明:自然对流换热随着孔隙率增大而减小。当孔隙率一定时,随着孔隙密度的增大,自然对流换热减小。Nu数随着加热功率的增大而增大,随着腔体倾斜角度的增大而减小。根据相似理论建立了以孔隙率、孔隙密度、倾斜角度为影响变量的换热准则关联式,且误差小于±7.5%。
关键词:  自然对流换热  多孔介质金属泡沫  孔隙率  孔隙密度
DOI:
基金项目:国家自然科学基金(No.51166003)资助项目。
Experimental Investigation on Natural Convection Heat Transfer of Porous Media Metal Foam
Qian Weiyang, Pan Yang, Peng Zhao
(School of Civil Engineering and Architecture, East China Jiaotong University)
Abstract:
Natural convection heat transfer is experimentally investigated for a porous medium, water-saturated copper foam, in a square cavity. The effects of porosity, pore density (PPI) and angle of inclination on natural convection heat transfer are discussed. The experimental results show that natural convection heat transfer rate increases with the decrease of porosity. For a given porosity, the heat transfer rate is found to be lower at higher pore densities. The Nusselt number decreases with the angle of inclination. According to the theory of similarity, the dimensionless heat transfer correlation, including porosity, pore density (PPI) and angle of inclination, is developed, and deviation is within ±7.5%.
Key words:  natural convection heat transfer  porous media metal foam  porosity  pore density

用微信扫一扫

用微信扫一扫