Cite this article
  •    [Click To Copy]
  •    [Click To Copy]
【Print This Page】 【Download PDF Full Text】 View/Add CommentDownload reader Close

←Previous Article|Next Article→

Back Issue    Advanced Search

This Article Has Been:Browse 1780 Times   Download 2193 Times QR code information in this article
Scan Up The Code!
采用变回水温度控制策略的空气源热泵空调系统研究
靳成成1, 王如竹1, 翟晓强1, 金哲权2
0
(1.上海交通大学制冷与低温工程研究所;2.挪威科技大学能源与过程工程系)
摘要:
为了提高空气源热泵空调系统运行性能,研究了一套采用变回水温度控制策略的空气源热泵机组的制冷性能。实验研究表明,变回水温度工况可满足室内冷负荷需求。与传统采用定12 ℃回水温度的空气源热泵空调系统相比,COP更高,耗电量更小,是一种高效节能的空气源热泵空调系统控制方法。此外,所建立的Dymola模型从理论上验证了实验结果,在此基础上模拟了实际空调系统的能耗,模拟结果表明,COP由3.99提高至4.39,提高了10%。
关键词:  空气源热泵  变回水温度  Dymola模拟  制冷性能实验  性能系数(COP)
DOI:
基金项目:
Analysis of an Air Source Heat Pump Space Cooling System under Variable Inlet Water Temperature Condition
Jin Chengcheng1, Wang Ruzhu1, Zhai Xiaoqiang1, Jin Zhequan2
(1.Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University;2.Institute of Energy and Process, Norwegian University of Science and Technology)
Abstract:
In order to enhance the operating performance of air source heat pump, the performance of air source heat pump (ASHP) system with the variable inlet water temperature strategy was experimentally studied. As field test shows, the condition of variable outlet water temperature could satisfy the indoor cooling demmand. Compared with traditional ASHP cooling system adopting fixed 12 ℃ inlet water temperature, this kind of system is proved to be with higher COP and lower power consumption, and therefore is an obvious energy saving system. In addition, the Dymola model was established to verify the experimental results, and the simulation of energy consumption of actual air conditioning system was conducted based on the model. The results indicated that COP would improve 10 percent from 3.99 to 4.39.
Key words:  air source heat pump  variable inlet water temperature  Dymola simulation  refrigeration performance test  COP

用微信扫一扫

用微信扫一扫