Cite this article
  •    [Click To Copy]
  •    [Click To Copy]
【Print This Page】 【Download PDF Full Text】 View/Add CommentDownload reader Close

←Previous Article|Next Article→

Back Issue    Advanced Search

This Article Has Been:Browse 1736 Times   Download 2153 Times QR code information in this article
Scan Up The Code!
复叠式空气源热泵系统的控制稳定性研究
陈剑波1, 姚晶珊1, 亢友立1, 韩星1, 李贺2, 王玉1
0
(1.上海理工大学环境与建筑学院;2.悉地国际设计顾问(深圳)有限公司)
摘要:
针对可在不同环境温度下制取高温热水的复叠式空气源热泵系统,运用二级压缩比大致相等的原则确定最优中间温度从而控制中间冷凝压力的方法。采用适用性较好的比例-积分-微分(Proportion Integration Differentiation,PID)算法,利用可编程逻辑控制器(Programmable Logic Controller,PLC)进行核心控制,通过实验验证了在不同的室外环境温度条件下,面对负荷的变化,该系统控制快速、平稳且精确,实现了对复叠式空气源热泵系统的优化控制。
关键词:  空气源热泵  复叠式  PID  PLC  控制  稳定性
DOI:
基金项目:国家自然科学基金(51208298)资助项目。
Research on Control Stability of Cascade Air-source Heat Pump
Chen Jianbo1, Yao Jingshan1, Kang Youli1, Han Xing1, Li He2, Wang Yu1
(1.School of Environment and Architecture, University of Shanghai for Science and Tecnolgy;2.CCDI GROUP)
Abstract:
For the cascade air-source heat pump operated under different environment temperature, the proper control of intermediate pressure is important. In this paper the principle that two stage compression ratio is approximately equal is used to determine the intermediate pressure at the optimal middle temperature. The proposed method and control strategy were implemented by highly applicable Proportion Integration Differentiation (PID) algorithm and Programmable Logic Controller(PLC).A test was conducted, and it showed that the control method was sensitive, stable and accurate with various outside conditions and indoor loads.
Key words:  air-source heat pump  cascade  PID  PLC  control  stability

用微信扫一扫

用微信扫一扫