Cite this article
  •    [Click To Copy]
  •    [Click To Copy]
【Print This Page】 【Download PDF Full Text】 View/Add CommentDownload reader Close

←Previous Article|Next Article→

Back Issue    Advanced Search

This Article Has Been:Browse 1697 Times   Download 355 Times QR code information in this article
Scan Up The Code!
R134a表面增强型蒸发强化传热管的实验研究
陈剑波,金传父,徐皓,陆明华
0
([1]上海理工大学城建学院上海200093 [2]江苏萃隆铜业有限公司江苏常熟215562)
摘要:
介绍了国外空调冷冻设备中采用的一种新型商用表面增强型蒸发强化传热管,并对其进行了实验研究.发现对使用R134a环保制冷工质,在低热流密度的条件下,表面增强型蒸发强化传热管具有十分优异的强化效果.在实验的换热工况下,保持进口水温不变而改变管内水流速,这种强化管的总换热性能是普通低翅蒸发强化管的 2.2到2.6倍,管外换热系数是普通低翅蒸发强化管的1.3~1.9倍.
关键词:  工程热物理  强化传热  实验研究  表面增强型强化传热  沸腾换热
DOI:
Revised:September 30, 2003
基金项目:
Experimental Study on Surface Enhanced Boiling Heat Exchanger Tubes with R134a
Abstract:
In this study, a typical boiling surface enhanced boiling heat exchanger tube was described and studied experimentally. When R134a is used as the refrigerant, the overall heat transfer coefficient and the outside heat transfer coefficient for this tube are 2.2-2.6 times and 1.3-1.9 times respectively as large as that of ordinary low-finned tubes at the low heat flux, the steady water inlet temperature, and the different water flow rates.
Key words:  Thermal physics engineering, enhanced heat transfer, experimental study, surface enhanced boiling heat exchanger tube, boiling heat transfer

用微信扫一扫

用微信扫一扫