| 摘要: |
| 采用6流程40扁管微通道冷凝器试制了一台6kW窗式空调样机,在标准焓差实验室提供的T1工况,T3工况和T3最大工况等三种工况下实验研究了该样机的性能,结果表明:在T1工况下与采用传统翅片铜管的样机相比,制冷量提高了4.27%约254W,输入功率减少了204W,而能效比则提高了12.32%,达到了2.28,可见,采用微通道冷凝器能够明显提高空调系统的容量,降低能耗,提高空调效率;T3工况和T3最大工况下该空调样能够保持正常运行,表明该空调样机配置合理,且满足T3类型炎热气候地区的要求。 |
| 关键词: 热工学 样机实验 微通道冷凝器 窗式空调 |
| DOI：10.3969/j.issn.0253-4339.年份（4位数字）.月份（2位数字）.文章的起始页码（3位数字） |
|
|
| 基金项目:广东省教育部产学研结合项目(2007A090302115); 粤港关键领域重点突破项目(佛山专项)(2007Z41)资助~~ |
|
| Experimental Research on Air Conditioner Prototype with 6-pass Microchannel Condenser |
|
| () |
| Abstract: |
| A 6kW window type air conditioner prototype with 6-pass microchannel condenser was developed and investigated experimentally under T1 standard,T3 standard and T3 maximum operating conditions.The result showed that under T1 standard operating condition the new developed prototype performed better than the one with traditional finned copper round tube heat exchanger: 254W(about 4.27%) higher in refrigerating capacity,204W less in input power and 12.32% higher in EER(i.e.,2.28),which revealed better performanc... |
| Key words: Pyrology Experiment Microchannel condenser Window type air conditioner |
