Experimental Study on the Enhancement of Gas-liquid Heat and Mass Transfer with TiO2-Ag Nanofluids

Mao Mao; Bian Chengle; Cai Zhanhao; Li Ningjun; Ma Xin; Ji Weikai; Yang Liu

doi:10.3969/j.issn.0253-4339.2023.02.113

您当前的位置：

首页 >

文章列表页 >

Experimental Study on the Enhancement of Gas-liquid Heat and Mass Transfer with TiO2-Ag Nanofluids

更新时间：2024-07-18

- Experimental Study on the Enhancement of Gas-liquid Heat and Mass Transfer with TiO2-Ag Nanofluids
- Journal of Refrigeration Vol. 44, Issue 2, (2023)
- 作者机构：
  
  1. 东南大学能源与环境学院
  2. 东南大学深圳研究院
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0253-4339.2023.02.113
  CLC：
- Published：2023
- 稿件说明：
移动端阅览
Mao Mao, Bian Chengle, Cai Zhanhao, et al. Experimental Study on the Enhancement of Gas-liquid Heat and Mass Transfer with TiO2-Ag Nanofluids[J]. Journal of Refrigeration, 2023, 44(2).
DOI：

Mao Mao, Bian Chengle, Cai Zhanhao, et al. Experimental Study on the Enhancement of Gas-liquid Heat and Mass Transfer with TiO2-Ag Nanofluids[J]. Journal of Refrigeration, 2023, 44(2). DOI： 10.3969/j.issn.0253-4339.2023.02.113.

摘要

在碳中和背景下，减少能源消耗、提高暖通运行能效和净化效率是在新时代亟需解决的问题。本文研究了载银二氧化钛（TiO2?-Ag）纳米流体的气液传热传质性能，探索了纳米流体在鼓泡、喷雾、填料等不同流动状态下的传热传质特性，分析了系统参数对传热传质效果的影响。结果表明：鼓泡工况相对于喷雾与填料工况的气液传热效果更好，其中气体流量的设定应同时考虑纳米流体稳定性和气液接触时间等因素来获得最佳效果，因此在本实验的设定中，选定最佳进口气体流量为4 L/min。

Abstract

With carbon neutrality becoming the strategic goal leading the sustainable development in China

reducing energy consumption and improving the efficiency and purification efficiency of HVAC systems are urgent issues that need to be resolved in the new era. The gas-liquid heat and mass transfer performance of TiO2-Ag nanofluid was investigated; the heat and mass transfer characteristics of nanofluids in different fluent states such as “bubbling” “spraying” and “filling” were explored; and the effects of the system parameters on the enhancement of heat and mass transfer were analyzed. The results show that the bubbling condition has a better gas-liquid heat transfer effect than the spray and filling conditions. Consequently

the setting of the gas flow rate should consider both the stability and gas-liquid contact time to obtain the best heat and mass transfer effects. Therefore

in this experiment

the optimal inlet gas flow rate was set to 4 L/min. The system showed an effectively enhanced heat and mass transfer and could serve as a significant reference for engineering applications.

关键词

Keywords

references

Views

1023

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study of the Heat Transfer Characteristics of Porous Microjets Boiling in Heat Sinks

Research on Evaporation and Deposition Characteristics of Suspended Droplets Containing Nanoparticles

Application of Three-Dimensional Distorted Tube Energy Recovery Device in Summer Air-Conditioning Fresh Air System

Effect of Tube Surface Structure on Performance of Pool Boiling Heat Transfer on Horizontal Single Tube

Study on the Effect of Foamed Metal Copper Filling Ratio on the Enhanced Heat Transfer Mechanism of Phase Change Materials

Related Author

Sun Jian

Ye Fan

Zhong Chao

Li Jie

Gao Feng

Li Yuanyuan

Lu Gui

Wang Yuting

Related Institution

School of Materials Science and Engineering, Jingdezhen Ceramic University

School of Energy Power and Mechanical Engineering, North China Electric Power University

TCL Delong Household Appliances (Zhongshan) Co., Ltd.

Key Laboratory of Renewable Energy, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences

School of Mechanical and Power Engineering, Shenyang University of Chemical Technology

Address：10/F, Yindu Mansion, 67 Fucheng Road, Haidian Dist, Beijing, China Postal code：100142
Tel：010-68711412 Email：editor@car.org.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰