| 摘要: |
| 汽车空调HVAC总成的气动噪声是汽车空调系统主要的噪声来源之一。本文分析了HVAC总成的气动噪声的产生机理，并对某车型HVAC总成的气动噪声表现进行了性能改进。建立了HVAC内部流场仿真模型，并通过修改空调分配箱壳体与鼓风机蜗壳的结构型线，调节模式风门的位置来优化内部流场结果。结果表明：优化后HVAC总成的气动噪声表现明显优于原状态；实车上使用频次较高的吹面、除霜模式下的噪声声压级，相比原状态分别降低2.3 dB(A)、3.3 dB(A)，降噪效果显著。 |
| 关键词: 汽车空调 HVAC总成 气动噪声 仿真模型 |
| DOI： |
| Received:April 09, 2018Revised:July 04, 2018 |
| 基金项目: |
|
| Analysis of the Aerodynamic Noise of an Automotive HVAC System |
|
Wang Linan1, Zhang Zhenyu1, Sun Qiang2, Chen Jiangping1
|
| (1.Institute of Refrigeration and Cryogenics,Shanghai Jiao Tong University;2.Electrical Department Jianghuai Automobile Co., Ltd.) |
| Abstract: |
| Automotive heating, ventilating, and air-conditioning (HVAC) noise is the primary noise source in an automotive air-conditioning system and mainly manifests as aerodynamic noise. In this study, the mechanism of aerodynamic noise generation in HVAC was assessed and the aerodynamic noise performance of a vehicle HVAC assembly was improved. The flow field of an HVAC system was simulated and optimized by modifying the molded lines of the air handling unit and the blower volute, and by adjusting the position of the damper. Results showed that the optimized HVAC assembly presents better noise performance than the baseline. Specifically, the noise sound pressure level was severely reduced by 2.3 and 3.3 dB(A) respectively in the vent and defrost modes , which are the typically used ones in the vehicle. |
| Key words: automotive air-conditioner HVAC assembly aerodynamic noise simulation model |
