中大容量工业余热高温热泵的压缩机技术现状

马凯; 陈文卿; 李丹童; 何志龙; 邢子文

doi:10.12465/j.issn.0253-4339.2025.01.001

您当前的位置：

首页 >

文章列表页 >

中大容量工业余热高温热泵的压缩机技术现状

热泵技术专栏 | 更新时间：2025-01-23

- 中大容量工业余热高温热泵的压缩机技术现状
- Development Status of Compressor Technology for Medium and Large Capacity Industrial High-Temperature Heat Pumps
- 制冷学报 2025年46卷第1期页码：1-15
- 作者机构：
  
  1.西安交通大学能源与动力工程学院　西安　 710049
  2.西安交通大学苏州研究院　苏州　 215123
- 作者简介：
  
  陈文卿，男，研究员，西安交通大学苏州研究院，18914061693，E-mail：wqchen@xjtusz.cn。研究方向：制冷压缩机、水蒸气压缩机技术及高温热泵系统。
- 基金信息：
- DOI：10.12465/j.issn.0253-4339.2025.01.001
  中图分类号： TB652;TU833
- 收稿：2024-02-03，
  
  修回：2024-02-22，
  
  录用：2024-02-29，
  
  纸质出版：2025-02-16
- 稿件说明：
移动端阅览
马凯, 陈文卿, 李丹童, 等. 中大容量工业余热高温热泵的压缩机技术现状[J]. 制冷学报, 2025,46(1):1-15.

Ma Kai, Chen Wenqing, Li Dantong, et al. Development Status of Compressor Technology for Medium and Large Capacity Industrial High-Temperature Heat Pumps[J]. Journal of Refrigeration, 2025, 46(1): 1-15.
马凯, 陈文卿, 李丹童, 等. 中大容量工业余热高温热泵的压缩机技术现状[J]. 制冷学报, 2025,46(1):1-15. DOI： 10.12465/j.issn.0253-4339.2025.01.001.

Ma Kai, Chen Wenqing, Li Dantong, et al. Development Status of Compressor Technology for Medium and Large Capacity Industrial High-Temperature Heat Pumps[J]. Journal of Refrigeration, 2025, 46(1): 1-15. DOI： 10.12465/j.issn.0253-4339.2025.01.001.

摘要

热泵技术是一种节能技术，能够有效应对全球变暖，降低碳排放。工业热泵回收供热过程的废热加热水或空气，可减少电力消耗及碳排放。工业热泵节能环保，供热稳定，已广泛应用于生产及生活的各个阶段。分析了国内外工业余热高温热泵的压缩机类型及特点，针对中大容量的双螺杆压缩机及离心压缩机，分析其应用及技术现状。螺杆式热泵压缩机在高蒸发温度时应采用开启式结构，高冷凝温度时可采用高速无油方案；离心式热泵压缩机除高效的叶轮外，应关注耐高温电机与无油润滑轴承。螺杆式水蒸气压缩机关注转子热变形及轴封问题，向大温升方向发展。

Abstract

Heat pump technology is an energy-saving solution that could potentially combat global warming and reduce carbon emissions. Industrial heat pumps recover waste heat from the heating process to heat water or air

thereby reducing electricity consumption and carbon emissions. Industrial heat pumps are energy-saving

environmentally friendly

and provide stable heating. They have been widely used at all stages of production and life. This study analyzes the compressor types and characteristics of domestic and international high-temperature heat pumps (HTHP) that recover industrial waste heat and analyzes their application and technical status with a focus on twin-screw and centrifugal compressors. Twin-screw heat pump compressors should adopt an open structure when the evaporation temperature is high

and high-speed and oil-free design can be used when the condensation temperature is high. In addition

centrifugal heat pump compressors should prioritize highly efficient impellers

high-temperature-resistant motors

and oil-free lubricated bearings. Screw steam compressors need to solve the problems of rotor thermal deformation and shaft seal

and target for large temperature lifts.

关键词

Keywords

references

吴治将 , 张学伟 . 中高温热泵技术在工业中的应用现状 [J ] . 制冷 , 2017 , 36 ( 1 ): 83 - 89 .

( WU Zhijiang , ZHANG Xuewei . The application of medium and high temperature heat pumps in industry [J ] . Refrigeration , 2017 , 36 ( 1 ): 83 - 89 .)

胡斌 , 姜佳彤 , 吴迪 , 等 . 工业高温热泵发展现状与展望 [J ] . 制冷学报 , 2023 , 44 ( 6 ): 1 - 12 .

( HU Bin , JIANG Jiatong , WU Di , et al . Development status and prospects of industrial high-temperature heat pumps [J ] . Journal of Refrigeration , 2023 , 44 ( 6 ): 1 - 12 .)

JIA Teng , HUANG Junpeng , LI Rui , et al . Status and prospect of solar heat for industrial processes in China [J ] . Renewable and Sustainable Energy Reviews , 2018 , 90 : 475 - 489 .

ZHANG Jing , ZHANG Honghu , HE Yaling , et al . A comprehensive review on advances and applications of industrial heat pumps based on the practices in China [J ] . Applied Energy , 2016 , 178 : 800 - 825 .

JIANG Jiatong , HU Bin , WANG Ruzhu , et al . A review and perspective on industry high-temperature heat pumps [J ] . Renewable and Sustainable Energy Reviews , 2022 , 161 : 112106 .

ARPAGAUS C , BLESS F , UHLMANN M , et al . High temperature heat pumps: market overview, state of the art, research status, refrigerants, and application potentials [J ] . Energy , 2018 , 152 : 985 - 1010 .

SCHLOSSER F , JESPER M , VOGELSANG J , et al . Large-scale heat pumps: applications, performance, economic feasibility and industrial integration [J ] . Renewable and Sustainable Energy Reviews , 2020 , 133 : 110219 .

YAN Hongzhi , HU Bin , WANG Ruzhu . Air-source heat pump for distributed steam generation: a new and sustainable solution to replace coal-fired boilers in China [J ] . Advanced Sustainable Systems , 2020 , 4 ( 11 ): 2000118 .

YAN Hongzhi , WANG Ruzhu , DU Shuai , et al . Analysis and perspective on heat pump for industrial steam generation [J ] . Advanced Energy and Sustainability Research , 2021 , 2 ( 5 ): 2000108 .

KANG D H , NA S I , KIM M S . Recent researches on steam generation heat pump system [J ] . International Journal of Air-Conditioning and Refrigeration , 2017 , 25 ( 4 ): 1730005 .

BLESS F , ARPAGAUS C , BERTSCH S , et al . Theoretical analysis of steam generation methods-Energy, CO 2 emission, and cost analysis [J ] . Energy , 2017 , 129 : 114 - 121 .

KOSMADAKIS G , MERAMVELIOTAKIS G , BAKALIS P , et al . Waste heat upgrading with high-temperature heat pumps for assisting steam generation in ships: performance, cost and emissions benefits [J ] . Applied Thermal Engineering , 2024 , 236 : 121890 .

唐志伟 , 张宏宇 , 牛利敏 , 等 . 热泵原理与工程设计 [M ] . 北京 : 化学工业出版社 , 2022 .

( TANG Zhiwei , ZHANG Hongyu , NIU Limin . Principle and engineering design of heat pump [M ] . Beijing : Chemical Industry Press , 2022 .)

Combitherm . High temperature heat pumps [DB/OL ] . ( 2021-08-13 ) [ 2024-01-10 ] . https://www.combitherm.de/en/produkte-und-loesungen/hochtemperaturwaermepum-pen/ https://www.combitherm.de/en/produkte-und-loesungen/hochtemperaturwaermepum-pen/ .

IEA Annex 58 . HWW 2/9583I R1233zd(E)/Combitherm GmbH [DB/OL ] . ( 2022-12-14 ) [ 2024-01-10 ] . https://heatpumpingtechnologies.org/annex58/wpcontent/uploads/sites/70/2022/12/combithermhthpannex58.pdf https://heatpumpingtechnologies.org/annex58/wpcontent/uploads/sites/70/2022/12/combithermhthpannex58.pdf .

Sabroe . HicaHP heat pumps [EB/OL ] . ( 2020-02-12 ) [ 2024-01-10 ] . https://www.sabroe.com/products-and-solutions/heat-pumps/hicahp_ir https://www.sabroe.com/products-and-solutions/heat-pumps/hicahp_ir .

Johnson Controls . OM multistage industrial chillers/York by Johnson Comtrols [EB/OL ] . ( 2012-09-28 ) [ 2024-01-10 ] . https://docs.johnsoncontrols.com/chillers/api/khub/documents/rW_egggvU5MHUri_hPAccQ/content https://docs.johnsoncontrols.com/chillers/api/khub/documents/rW_egggvU5MHUri_hPAccQ/content .

Ochsner Energie Technik GmbH . Hochtemperatur-Wärmepumpen zur energetischen Nutzung industrieller [DB/OL ] . ( 2016-06-21 ) [ 2024-01-10 ] . https://www.nachhaltigwirtschaften.at/resources/iea_pdf/events/20160622_highlights_der_energieforschung_2016_vortrag_zauner.pdf https://www.nachhaltigwirtschaften.at/resources/iea_pdf/events/20160622_highlights_der_energieforschung_2016_vortrag_zauner.pdf .

Ochsner . High capacity heat pumps [EB/OL ] . ( 2021-11-25 ) [ 2024-01-10 ] . https://www.ochsner.com/en/ochsner-products/high-capacity-heat-pumps/ https://www.ochsner.com/en/ochsner-products/high-capacity-heat-pumps/ .

IEA Annex 58 . Screw compressor high-temperature heat pump [DB/OL ] . ( 2022-01-13 ) [ 2024-01-10 ] . https://heatpumpingtechnologies.org/annex58/wp-con-tent/uploads/sites/70/2022/07/hthpannex58templatesupp-liertechnologyrankfinal.pdf https://heatpumpingtechnologies.org/annex58/wp-con-tent/uploads/sites/70/2022/07/hthpannex58templatesupp-liertechnologyrankfinal.pdf .

IEA Annex 58 . Screw compressor for water vapor heat pump technology [DB/OL ] . ( 2022-02-03 ) [ 2024-01-10 ] . https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/srmhthpannex58final.pdf https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/srmhthpannex58final.pdf .

IEA Annex 58 . Screw grow heat pump/SGH120-Kobelco compressor [DB/OL ] . ( 2021-08-27 ) [ 2024-1-10 ] . https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/technologykobelcosgh120-1.pdf https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/technologykobelcosgh120-1.pdf .

IEA Annex 58 . Screw grow heat pump/SGH165 Kobelco compressor [DB/OL ] . ( 2021-08-27 ) [ 2024-01-10 ] . https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/technologykobelcosgh165.pdf https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/technologykobelcosgh165.pdf .

IEA Annex 58 . Micro recovery compressor/MSRC160L-Kobelco compressor [DB/OL ] . ( 2021-08-27 ) [ 2024-01-10 ] . https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/technologykobelcom-src160l-1.pdf https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/technologykobelcom-src160l-1.pdf .

OUE T , OKADA K . Air-sourced 90 ℃ hot water supplying heat pump “HEM-90A” [J ] . Kobelco Technology Review , 2013 , 32 : 70 - 74 .

GEA . GEA grasso FX P [EB/OL ] . ( 2023-04-06 ) [ 2024-01-10 ] . https://www.gea.com/zh/products/refrige-rationheating/chillers/grasso-fx-p-fx-pduo-compressor%20.jsp https://www.gea.com/zh/products/refrige-rationheating/chillers/grasso-fx-p-fx-pduo-compressor%20.jsp .

GEA Annex 58 . GEA CO 2 heat pump/GEA heating and refrigeration technologies [DB/OL ] . ( 2022-05-06 ) [ 2024-01-10 ] . https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/hthpannex58suppliertechnologygea.pdf https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/hthpannex58suppliertechnologygea.pdf .

Aneo . High temperature heat pump [EB/OL ] . ( 2023-11-17 ) [ 2024-01-10 ] . https://www.aneo.com/tjenester/industry/english/technology/ https://www.aneo.com/tjenester/industry/english/technology/ .

IEA Annex 58 . 130 ℃ Hot water supply heat pump/ETW-S Mitsubishi heavy [DB/OL ] . ( 2021-08-27 ) [ 2024-01-10 ] . https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/technologymhietw-s.pdf https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/technologymhietw-s.pdf .

IEA Annex 58 . Rotation heat pump/ecop technologies GmbH [DB/OL ] . ( 2022-02-02 ) [ 2024-01-10 ] . https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/hthpannex58ecopv2.pdf https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/hthpannex58ecopv2.pdf .

IEA Annex 58 . High temperature heat pump/enertime [DB/OL ] . ( 2022-05-12 ) [ 2024-01-10 ] . https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/hthpannex58enertimetechnologyv2.pdf https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/hthpannex58enertimetechnologyv2.pdf .

IEA Annex 58 . Large heat pumps/turboden s. p. A [DB/OL ] . ( 2024-01-02 ) [ 2024-01-10 ] . https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2024/01/20231222hthpannex58templatesuppliertechno-logyrev3.pdf https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2024/01/20231222hthpannex58templatesuppliertechno-logyrev3.pdf .

IEA Annex 58 . Industrial heat pump/Siemens energy [DB/OL ] . ( 2021-08-02 ) [ 2024-01-10 ] . https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/siemens-energy-hthp-technology.pdf https://heatpumpingtechnologies.org/annex58/wp-content/uploads/sites/70/2022/07/siemens-energy-hthp-technology.pdf .

CHAMOUN M , RULLIERE R , HABERSCHILL P , et al . Modelica-based modeling and simulation of a twin screw compressor for heat pump applications [J ] . Applied Thermal Engineering , 2013 , 58 ( 1/2 ): 479 - 489 .

STOSIC N , SMITH I K , KOVACEVIC A , et al . Geometry of screw compressor rotors and their tools [J ] . Journal of Zhejiang University: Science A , 2011 , 12 ( 4 ): 310 - 326 .

HAUSER J , BRUEMMER A , KAUDER K . Rotor profile generation and optimization of screw machines using NURBS [C ] // International Compressor Engineering Conference . Purdue : Purdue University , 2008 .

UTRI M , BRÜMMER A , HAUSER J . Comparison of thermodynamic efficiency between constant, dual and multiple lead rotors for an industrial air screw compressor [C ] // IOP Conference Series: Materials Science and Engineering . London : IOP Publishing , 2018 , 425 ( 1 ): 012025 .

UTRI M , BRÜMMER A . Improvement of the efficiency of twin-screw refrigeration compressors by means of dual lead rotors [C ] // 23rd International Compressor Engineering Conference . Purdue : Purdue University , 2016 .

WU Huagen , LIU Jiankang , SHEN Yuqi , et al . Research on performance of variable-lead rotor twin screw compressor [J ] . Energies , 2021 , 14 ( 21 ): 6970 .

LU Y , HOANG K , NOAKE D , et al . Design and analysis of conical rotary compressor [C ] // IOP Conference Series: Materials Science and Engineering . London : IOP Publishing , 2022 , 1267 ( 1 ): 012001 .

LU Y , KHOI H , NOAKE D , et al . Quasi 1D modelling of conical rotary compressors [C ] // 26th International Compressor Engineering Conference . Purdue : Purdue University , 2022 .

HU Wangfeng , HE Zhilong , LI Dantong , et al . Geometry of intersecting-axis conical twin-screw rotors [J ] . Mechanism and Machine Theory , 2022 , 174 : 104913 .

ZHANG Zhao , WU Weifeng . Numerical investigation of thermal deformation of meshing pairs in single screw compressor [J ] . Applied Thermal Engineering , 2021 , 188 : 116614 .

WANG Chuang , WANG Bingqi , LIU Mingkun , et al . A review of recent research and application progress in screw machines [J ] . Machines , 2022 , 10 ( 1 ): 62 .

WANG Junli , LI Tuolei , LEI Shuai , et al . Structural characteristics of twin-screw compressor rotor based on thermal-solid coupling method [J ] . Journal of Vibroengineering , 2020 , 22 ( 6 ): 1534 - 1546 .

MUSTAFIN T N , YAKUPOV R R , BURMISTROV A V , et al . Analysis of the screw compressor rotors' non-uniform thermal field effect on transmission error [C ] // IOP Conference Series: Materials Science and Engineering . London : IOP Publishing , 2015 , 90 : 12004 .

ZHANG Xuejing , YANG Junhu , MA Chong , et al . The influence of gas volume fractions on deformation and volumetric efficiency of twin-screw multiphase pump based on fluid-thermal-structure coupling numerical calculation [J ] . Physics of Fluids , 2021 , 33 ( 7 ): 075103 .

NITULESCU M , SLUJITORU C , PETRESCU V , et al . Reducing rotors clearance - a way to increase the performance of a screw compressor [C ] // IOP Conference Series: Materials Science and Engineering . London : IOP Publishing , 2021 , 1180 ( 1 ): 012007 .

SUN Shizhong , LI Yanpeng , CHEN Wenqing , et al . Minimum clearance technology to improve performance of twin-screw refrigeration compressors by spraying coating on rotors [J ] . Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , 2021 , 235 ( 4 ): 1082 - 1091 .

刘明昆 , 李彦澎 , 王闯 , 等 . “双碳”目标下螺杆制冷压缩机的技术发展趋势 [J ] . 制冷与空调(北京) , 2022 , 22 ( 3 ): 55 - 62 .

( LIU Mingkun , LI Yanpeng , WANG Chuang , et al . Development trend of screw refrigeration compressor under carbon peaking and carbon neutrality goals [J ] . Refrigeration and Air-conditioning , 2022 , 22 ( 3 ): 55 - 62 .)

孙时中 , 马冬雪 , 张运运 , 等 . 变频螺杆式制冷压缩机的应用现状及研究进展 [J ] . 制冷与空调(北京) , 2019 , 19 ( 2 ): 70 - 76 .

( SUN Shizhong , MA Dongxue , ZHANG Yunyun , et al . Application status and research progress of frequency-conversion screw refrigeration compressor [J ] . Refrigeration and Air-conditioning , 2019 , 19 ( 2 ): 70 - 76 .)

SUN Shizhong , XING Ziwen , LI Yanpeng , et al . Experimental investigation on twin screw refrigeration compressor with different capacity control methods [J ] . International Journal of Refrigeration , 2021 , 130 : 370 - 381 .

WANG Yu , WANG Zhiwei , LI Mingzhu , et al . An optimal matching strategy for screw compressor for heat pump applications [J ] . Applied Thermal Engineering , 2018 , 132 : 333 - 340 .

张森 . 半封闭单机双级螺杆压缩机的研究与开发 [D ] . 大连 : 大连理工大学 , 2016 .

( ZHANG Sen . Research and development of a semi-hermetic compound two stage screw compressor [D ] . Dalian : Dalian University of Technology , 2016 .)

ZHANG Zhiping , QIU Hongye , LI Dantong , et al . Development of ultra-high-efficiency medium-capacity chillers with two-stage compression and interstage vapor injection technologies [J ] . Energies , 2022 , 15 ( 24 ): 9562 .

WANG Chuang , WU Xiaokun , SUN Shizhong , et al . Potential evaluation of water-cooled multiple screw chillers with serial water loops and development of ultra-efficient dual screw chillers [J ] . Applied Thermal Engineering , 2022 , 210 : 118340 .

WU Huagen , LIN Kanlong , HUANG Hao , et al . Research on effects of vapor injection on twin-screw compressor performance [J ] . International Journal of Refrigeration , 2020 , 118 : 483 - 490 .

邢子文 . 螺杆压缩机：理论、设计及应用 [M ] . 北京 : 机械工业出版社 , 2000 .

( XING Ziwen . Screw compressor: theory, design and application [M ] . Beijing : China Machine Press , 2000 .)

STOSIC N , SMITH I K , KOVAČEVIĆ A . Screw compres-sors: mathematical modelling and performance calculation [M ] . Berlin : Springer , 2005 .

HE Zhilong , WANG Tao , WANG Xiaolin , et al . Experimental investigation into the effect of oil injection on the performance of a variable speed twin-screw compressor [J ] . Energies , 2018 , 11 ( 6 ): 1342 .

WANG Chuang , XING Ziwen , CHEN Wenqing , et al . Development of an oil free water-lubricated twin-screw air compressor [J ] . Applied Thermal Engineering , 2018 , 143 : 396 - 402 .

WU Xiaokun , XING Ziwen , HE Zhilong , et al . Effects of lubricating oil on the performance of a semi-hermetic twin screw refrigeration compressor [J ] . Applied Thermal Enginee-ring , 2017 , 112 : 340 - 351 .

BASHA N , KOVACEVIC A , RANE S . Numerical investi-gation of oil injection in screw compressors [J ] . Applied Thermal Engineering , 2021 , 193 : 116959 .

WANG Chuang , LIU Mingkun , WANG Bingqi , et al . Research on power consumption distribution characteristics of a water-lubricated twin-screw air compressor for fuel cell applications [J ] . Energy , 2022 , 256 : 124673 .

沈九兵 , 何志龙 , 邢子文 . 采用喷水螺杆式水蒸气压缩机的高温热泵设计及性能分析 [J ] . 制冷与空调(北京) , 2014 , 14 ( 2 ): 95 - 98 .

( SHEN Jiubing , HE Zhilong , XING Ziwen . Design and performance analysis of high temperature heat pump using water-jet screw type steam compressor [J ] . Refrigeration and Air-conditioning , 2014 , 14 ( 2 ): 95 - 98 .)

张良 . 湿蒸汽两相压缩过程工作特性研究 [D ] . 大连 : 大连理工大学 , 2006 .

( ZHANG Liang . Research on the characteristics of wet steam compression process [D ] . Dalian : Dalian University of Technology , 2006 .)

肖芳 , 刘常峰 , 姚同林 . 螺杆式蒸汽压缩热泵系统性能试验研究 [J ] . 制冷技术 , 2017 , 37 ( 5 ): 48 - 52 .

( XIAO Fang , LIU Changfeng , YAO Tonglin . Experimental study on performance of screw type steam compression heat pump system [J ] . Chinese Journal of Refrigeration Technology , 2017 , 37 ( 5 ): 48 - 52 .)

WU Di , JIANG Jiatong , HU Bin , et al . Experimental investigation on the performance of a very high temperature heat pump with water refrigerant [J ] . Energy , 2020 , 190 : 116427 .

TIAN Yafen , SHEN Jiubing , WANG Chuang , et al . Modeling and performance study of a water-injected twin-screw water vapor compressor [J ] . International Journal of Refrigeration , 2017 , 83 : 75 - 87 .

TIAN Yafen , GENG Yanting , YUAN Haonan , et al . Investigation on water injection characteristics and its influence on the performance of twin-screw steam compressor [J ] . Energy , 2022 , 259 : 124886 .

TIAN Yafen , LU Jialun , SHEN Jiubing , et al . Optimization on shaft seals for a twin-screw steam compressor based on a novel uniform property region (UPR) model on discharge end-face [J ] . International Journal of Refrigeration , 2018 , 91 : 167 - 176 .

HUGHES D , MCMULLAN J T , MAWHINNEY K , et al . Lubricant related problems with heat-pumps [C ] // International Compressor Engineering Conference . Purdue : Purdue University , 1980 .

MARSH K N , KANDIL M E . Review of thermodynamic properties of refrigerants + lubricant oils [J ] . Fluid Phase Equilibria , 2002 , 199 ( 1/2 ): 319 - 334 .

SHAH N , COTTER D , HUANG M , et al . Lubricant investigation for high temperature heat pump application [C ] // 2nd Symposium on High-Temperature Heat Pumps . Copenhagen : SINTEF , 2019 .

CHESTER . Refrigerant/lubricant interactions testing in high temperature heat pumps [DB/OL ] . ( 2019-01-08 ) [ 2024-01-10 ] . https://ec.europa.eu/research/partici-pants/documents/dow-nloadPublic?documentIds=080166e5c64f6d83&appId=PPGMS https://ec.europa.eu/research/partici-pants/documents/dow-nloadPublic?documentIds=080166e5c64f6d83&appId=PPGMS .

TIAN Yafen , YUAN H , WANG Chuang , et al . Numerical investigation on mass and heat transfer in an ammonia oil-free twin-screw compressor with liquid injection [J ] . International Journal of Thermal Sciences , 2017 , 120 : 175 - 184 .

ULRICH A M , IGNAT T , KRISTIAN T E , et al . Numerical investigation of an oil-free liquid-injected screw compressor with ammonia-water as refrigerant for high temperature heat pump applications [J ] . Applied Thermal Engineering , 2023 , 219 : 119425 .

STOSIC N , KOVACEVIC A , SMITH I . An investigation of liquid injection in refrigeration screw compressors [C ] // The 5th International Conference on Compressors and Refrigeration . Dalian : ICCR , 2005 .

PATEL H H , LAKHERA V J . A critical review of the experimental studies related to twin screw compressors [J ] . Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering , 2020 , 234 ( 1 ): 157 - 170 .

VAN DEN BRAEMBUSSCHE R . Design and analysis of centrifugal compressors [M ] . New York : John Wiley & Sons , 2019 .

JAATINEN-VÄRRI A , HONKATUKIA J , UUSITALO A , et al . Centrifugal compressor design for high-temperature heat pumps [J ] . Applied Thermal Engineering , 2024 , 239 : 122087 .

邵佳丰 , 罗晨 , 周怡君 , 等 . 离心压缩机分流叶片长度与周向位置优化设计 [J ] . 机械设计与制造 , 2023 ( 9 ): 32 - 36 .

( SHAO Jiafeng , LUO Chen , ZHOU Yijun , et al . Optimization design of the length and circumferential position of centrifugal compressor splitter blades [J ] . Machinery Design & Manufacture , 2023 ( 9 ): 32 - 36 .)

舒信伟 , 陈婷 . 分流叶片位置对离心压缩机级内部流动和性能影响的数值研究 [J ] . 流体机械 , 2015 , 43 ( 9 ): 31 - 35 .

( SHU Xinwei , CHEN Ting . Numerical investigation of the influence of the splitter position on the flowfield and performance of a centrifugal compressor stage [J ] . Fluid Machinery , 2015 , 43 ( 9 ): 31 - 35 .)

孙涛 , 王毅 , 王晓放 , 等 . 变厚度叶片对离心压缩机结构强度和性能影响 [J ] . 大连理工大学学报 , 2012 , 52 ( 1 ): 29 - 34 .

( SUN Tao , WANG Yi , WANG Xiaofang , et al . Influence of variable-thickness blade on structural strength and performance of centrifugal compressor [J ] . Journal of Dalian University of Technology , 2012 , 52 ( 1 ): 29 - 34 .)

XIE Xing , LI Zhenlin , ZHU Baoshan , et al . Multi-objective optimization design of a centrifugal impeller by positioning splitters using GMDH, NSGA-III and entropy weight-TOPSIS [J ] . Journal of Mechanical Science and Technology , 2021 , 35 ( 5 ): 2021 - 2034 .

EKRADI K , MADADI A . Performance improvement of a transonic centrifugal compressor impeller with splitter blade by three-dimensional optimization [J ] . Energy , 2020 , 201 : 117582 .

NEVEROV V V , KOZHUKHOV Y V , YABLOKOV A M , et al . Optimization of a centrifugal compressor impeller using CFD: the choice of simulation model parameters [C ] // IOP Conference Series: Materials Science and Engineering . London : IOP Publishing , 2017 , 232 ( 1 ): 012037 .

JU Yaping , LIU Yiming , JIANG Wei , et al . Aerodynamic analysis and design optimization of a centrifugal compressor impeller considering realistic manufacturing uncertainties [J ] . Aerospace Science and Technology , 2021 , 115 : 106787 .

TANG Xinzi , WANG Zhe , PENG Xiao , et al . Uncertainty quantification based optimization of centrifugal compressor impeller for aerodynamic robustness under stochastic operational conditions [J ] . Energy , 2020 , 195 : 116930 .

TANG Xinzi , GU Nengwei , WENBIN W , et al . Aerodynamic robustness optimization and design exploration of centrifugal compressor impeller under uncertainties [J ] . International Journal of Heat and Mass Transfer , 2021 , 180 : 121799 .

CHEN J P , LI Z J , FU D G , et al . Modelling and theoretical analysis of a high temperature heat pump system with two-stage centrifugal compressor [J ] . Journal of the Energy Institute , 2011 , 84 ( 4 ): 200 - 206 .

TURUNEN-SAARESTI T , RÖYTTÄ P , HONKATUKIA J , et al . Predicting off-design range and performance of refrigeration cycle with two-stage centrifugal compressor and flash intercooler [J ] . International Journal of Refrigeration , 2010 , 33 ( 6 ): 1152 - 1160 .

YI Kexin , ZHAO Yuanyang , YU Guoxin , et al . Research on performance of refrigeration centrifugal compressor with gas bearings for water chillers [J ] . Energy Reports , 2022 , 8 : 5562 - 5569 .

COUSINS W , YU Lei , SISHTLAVISHNU M , et al . Analytical and experimental results of a novel single-stage centrifugal compressor with economizer injection [C ] // Turbo Expo: Power for Land, Sea, and Air . Norway : American Society of Mechanical Engineers , 2018 .

HU Bin , XU Shengzhi , WANG Ruzhu , et al . Investigation on advanced heat pump systems with improved energy efficiency [J ] . Energy Conversion and Management , 2019 , 192 : 161 - 170 .

HU Bin , LIU Hua , JIANG Jiatong , et al . Ten megawatt scale vapor compression heat pump for low temperature waste heat recovery: onsite application research [J ] . Energy , 2022 , 238 : 121699 .

HALBE C , O'BRIEN W , COUSINS W , et al . A numerical analysis of the effects of liquid carryover on the performance of a two-stage centrifugal compressor [C ] // Turbo Expo: Power for Land, Sea, and Air . Norway : American Society of Mechanical Engineers , 2018 .

HALBE C , O'BRIEN W , COUSINS W , et al . A CFD analysis of the effects of two-phase flow in a two-stage centrifugal compressor [C ] // Turbo Expo: Power for Land, Sea, and Air . Canada : American Society of Mechanical Engineers , 2015 .

HAN Leilei , LI Fubao , LI Ningkang , et al . The development of high efficiency integrally geared driven multistage centrifugal compressor [J ] . International Journal Fluid Mechanics & Thermal Sciences , 2020 , 6 ( 2 ): 53 - 60 .

谭建明 , 刘华 , 张治平 . 永磁同步变频离心式冷水机组的研制及性能分析 [J ] . 流体机械 , 2015 , 43 ( 7 ): 82 - 87 .

( TAN Jianming , LIU Hua , ZHANG Zhiping . Development and performance analysis of the permanent-magnetic synchronous frequency-convertible centrifugal chiller [J ] . Fluid Machinery , 2015 , 43 ( 7 ): 82 - 87 .)

刘华 , 张治平 , 王升 , 等 . 我国离心式制冷机组发展现状及趋势 [J ] . 暖通空调 , 2022 , 52 ( 12 ): 41 - 47 .

( LIU Hua , ZHANG Zhiping , WANG Sheng , et al . Development status and trend of centrifugal chillers in China [J ] . Journal of HV&AC , 2022 , 52 ( 12 ): 41 - 47 .)

GRONWALD P O , KERN T A . Traction motor cooling systems: a literature review and comparative study [J ] . IEEE transactions on transportation electrification , 2021 , 7 ( 4 ): 2892 - 2913 .

LIU Yiteng , LIU Guangbin , YANG Qichao , et al . Research on motor cooling process of centrifugal refrigeration compressor with gas bearings [J ] . International Journal of Refrigeration , 2023 , 145 : 68 - 77 .

胡丰凡 , 王闯 , 李豪 , 等 . 无油制冷压缩机技术现状与发展趋势 [J ] . 制冷与空调(北京) , 2017 , 17 ( 2 ): 58 - 64 .

( HU Fengfan , WANG Chuang , LI Hao , et al . Technical status and development trend of oil-free refrigeration compressor [J ] . Refrigeration and Air-conditioning , 2017 , 17 ( 2 ): 58 - 64 .)

韩邦成 , 崔炳伟 , 郑世强 , 等 . 磁悬浮压缩机顶隙调压模型与实验 [J ] . 振动测试与诊断 , 2019 , 39 ( 2 ): 286 - 291 .

( HAN Bangcheng , CUI Bingwei , ZHENG Shiqiang , et al . Model and experimental research on the relation between pressure and impeller clearance of magnetic levitation compressor [J ] . Journal of Vibration, Measurement & Diagnosis , 2019 , 39 ( 2 ): 286 - 291 .)

胡余生 , 李立毅 , 郭伟林 , 等 . 磁悬浮制冷离心压缩机停机气流冲击抑制研究 [J ] . 电机与控制学报 , 2022 , 26 ( 1 ): 24 - 31 .

( HU Yusheng , LI Liyi , GUO Weilin , et al . Study on suppression of airflow impact during shutdown of magnetic suspension refrigeration centrifugal compressor [J ] . Electric Machines and Control , 2022 , 26 ( 1 ): 24 - 31 .)

FILATOV A , HAWKINS L . Active radial electromagnetic damper [C ] // 2019 IEEE International Electric Machines & Drives Conference . San Diego : IEEE , 2019 .

SASAKI M , SUGIURA T . Vibration reduction of rotor supported by superconducting magnetic bearing utilizing electromagnetic shunt damper [J ] . IEEE Transactions on Applied Superconductivity , 2016 , 26 ( 3 ): 1 - 4 .

王春 , 赵远扬 , 衣可心 , 等 . R134a静压气体轴承静特性及其对制冷系统的影响研究 [J ] . 机床与液压 , 2022 , 50 ( 15 ): 92 - 96 .

( WANG Chun , ZHAO Yuanyang , YI Kexin , et al . Gas bearing static pressure characteristics of refrigeration centrifugal compressor with R134a and its influence on refrigeration system [J ] . Machine Tool & Hydraulics , 2022 , 50 ( 15 ): 92 - 96 .)

连华奇 , 李育隆 , 吴宏 , 等 . 热泵压缩机氟利昂气体止推轴承静态特性研究 [J ] . 载人航天 , 2018 , 24 ( 3 ): 377 - 382 .

( LIAN Huaqi , LI Yulong , WU Hong , et al . Study on static characteristics of gas thrust bearing with Freon in heat pump compressor [J ] . Manned Spaceflight , 2018 , 24 ( 3 ): 377 - 382 .)

杜平安 , 陈建伟 , 王珏 , 等 . 气体轴承-转子耦合作用下离心机回转误差计算 [J ] . 电子科技大学学报 , 2017 , 46 ( 2 ): 469 - 474 .

( DU Ping'an , CHEN Jianwei , WANG Jue , et al . Rotation error calculation of the spindle of precision centrifuge under the coupling effect of aerostatic bearing-rotor system [J ] . Journal of University of Electronic Science and Technology of China , 2017 , 46 ( 2 ): 469 - 474 .)

SONG Junnan , LIU Guangbin , GONG Jieming , et al . Simulation on performance and regulation strategy of centrifugal refrigeration compressor with gas bearings in water chiller [J ] . Applied Thermal Engineering , 2024 , 236 : 121650 .

浏览量

3734

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

中大容量工业余热高温热泵的压缩机技术现状

应用于MVC系统的水蒸气压缩机研究进展

基于半经验模型的变工质双螺杆制冷压缩机运行特性

新型环保工质HP-1物性和高温热泵应用特性研究

采用干工质的补气增焓高温热泵循环热力学分析