Profile Design and Leakage Characteristics of Scroll Compressor with Trapezoidal Cross Section

Wu Jiahao; Song Xia; Shi Junye; Chen Jiangping

doi:10.3969/j.issn.0253-4339.2022.02.046

您当前的位置：

首页 >

文章列表页 >

Profile Design and Leakage Characteristics of Scroll Compressor with Trapezoidal Cross Section

更新时间：2024-07-18

- Profile Design and Leakage Characteristics of Scroll Compressor with Trapezoidal Cross Section
- Journal of Refrigeration Vol. 43, Issue 2, (2022)
- 作者机构：
  
  1. 上海交通大学制冷与低温工程研究所
  2. 上海市高效冷却系统工程技术研究中心
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0253-4339.2022.02.046
  CLC：
- Published：2022
- 稿件说明：
移动端阅览
Wu Jiahao, Song Xia, Shi Junye, et al. Profile Design and Leakage Characteristics of Scroll Compressor with Trapezoidal Cross Section[J]. Journal of refrigeration, 2022, 43(2).
DOI：

Wu Jiahao, Song Xia, Shi Junye, et al. Profile Design and Leakage Characteristics of Scroll Compressor with Trapezoidal Cross Section[J]. Journal of refrigeration, 2022, 43(2). DOI： 10.3969/j.issn.0253-4339.2022.02.046.

摘要

电动汽车整车热管理系统需要搭载大排量的涡旋压缩机以适应多工况高负载的设计需求。本文提出一种大排量涡旋压缩机的型线设计方法，通过经实验校正的仿真模型研究了梯形截面涡旋压缩机的几何特性及泄漏特性。计算结果表明：梯形截面涡旋压缩机在保证齿根强度校核的前提下，平均壁厚降低29.9%，排量提升19.5%。研究型线设计参数对泄漏特性的影响，发现梯形截面涡旋压缩机的内泄漏率与等壁厚涡旋压缩机相差不足2%，具有良好的应用前景。

Abstract

An integrated thermal management system for an electric vehicle requires a scroll compressor with a large displacement that runs under multiple working conditions and high loads. A design method for the scroll profile to enlarge compressor displacement was proposed. The geometric and thermodynamic characteristics of the novel scroll compressor were studied using a simulation model validated experimentally. The results show that the trapezoidal section scroll compressor can increase the displacement by 19.5% by reducing the average wall thickness by 29.9%

on the premise of ensuring the strength reliability of the root of the scroll wrap. Based on the influence of the profile parameters on the leakage characteristics

it was found that the difference of internal leakage rate between a trapezoidal cross-sectional scroll compressor and a constant-wall thickness scroll compressor is less than 2%

showing huge potential for application of trapezoidal cross-sectional scroll compressor.

关键词

Keywords

references

Views

1178

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Optimization of Involute Profile Parameters with Variable Base Circle for Scroll Compressors

Diffusion Distribution Characteristics and Flammable Areas of Refrigerants Encountering Obstacles in Confined Spaces

Leakage Components and Causes Analysis of Split Air-conditioning System Based on Statistical Data

Optimization of line control parameters for scroll compressors with variable base circle involute

Related Author

Liu Xiangnong

Zhang Yu

Sun Dongfang

Zhou Pei

Tang Jingchun

Pan Shuli

Han Xiaohong

Ouyang Hongsheng

Related Institution

School of Automotive and Transportation Engineering, Hefei University of Technology

State Key Lab for Fluorine Greenhouse Gases Replacement and Control Treatment, Zhejiang Research Institute of Chemical Industry

Key Laboratory of Refrigeration and Cryogenic Technology of Zhejiang Province, Institute of Refrigeration and Cryogenics, Zhejiang University

Key Laboratory of Efficient Utilization of Low and Medium Grade Energy, Tianjin University

欧悦冰雪投资管理北京有限公司

Address：10/F, Yindu Mansion, 67 Fucheng Road, Haidian Dist, Beijing, China Postal code：100142
Tel：010-68711412 Email：editor@car.org.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰