Analysis and Experiment on the Air-side Heat Transfer Model of Cylindrical Fin-and-tube Heat Exchanger

Huang Chu; Gu Bo; Tian Zhen; Sha Yuxiong

doi:10.3969/j.issn.0253-4339.2021.02.083

您当前的位置：

首页 >

文章列表页 >

Analysis and Experiment on the Air-side Heat Transfer Model of Cylindrical Fin-and-tube Heat Exchanger

更新时间：2024-07-18

- Analysis and Experiment on the Air-side Heat Transfer Model of Cylindrical Fin-and-tube Heat Exchanger
- Journal of Refrigeration Vol. 42, Issue 2, (2021)
- 作者机构：
  
  1. 上海交通大学制冷与低温工程研究所
  2. 上海海事大学商船学院
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0253-4339.2021.02.083
  CLC：
- Published：2021
- 稿件说明：
移动端阅览
Huang Chu, Gu Bo, Tian Zhen, et al. Analysis and Experiment on the Air-side Heat Transfer Model of Cylindrical Fin-and-tube Heat Exchanger[J]. Journal of refrigeration, 2021, 42(2).
DOI：

Huang Chu, Gu Bo, Tian Zhen, et al. Analysis and Experiment on the Air-side Heat Transfer Model of Cylindrical Fin-and-tube Heat Exchanger[J]. Journal of refrigeration, 2021, 42(2). DOI： 10.3969/j.issn.0253-4339.2021.02.083.

摘要

本文对筒型翅片管换热器的空气侧流动特点进行了理论分析，基于现有换热模型提出了一种能够反映筒型翅片管换热器结构特点的集中参数形式的换热因子关联式。通过实验对比了筒型和普通型的换热因子，对理论分析进行验证，结果表明：现有换热模型对筒型翅片管换热器的预测误差较大，平均相对误差达到81.16%；对传统换热器预测较准，平均误差为7.53%；使用本文实验数据拟合后的新关联式对筒型换热器平均相对误差仅为8.86%，对传统换热器平均误差为8.80%，且误差分布均匀，大幅提高了关联式对筒型翅片管换热器的预测精度，也保持了对传统换热器的预测精度。

Abstract

A theoretical analysis on the air-side flow characteristics of cylindrical fin-and-tube heat exchanger was carried out. Based on the existing heat transfer model

a correlation formula of lumped parameters

which can reflect the structural characteristics of the cylindrical fin-and-tube heat exchanger

was proposed. The heat transfer factors of the cylindrical and common types were experimentally studied and the theoretical analysis was verified. The average relative error of the existing heat exchanger model was 81.16% for the cylindrical heat exchanger

while that of the traditional heat exchanger was 7.53%. The average relative error of the new correlation was only 8.86% for the cylindrical heat exchanger and 8.80% for the traditional heat exchanger

and the error distribution was uniform

which indicates that the prediction accuracy of new correlation is significantly improved for the cylindrical heat exchanger and maintained for the traditional heat exchanger.

关键词

Keywords

references

Views

2382

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Convective Heat Transfer Characteristics of MWNTs Water-based Nanofluid

Experimental Investigation on Influence of Fin Structures on Particle Deposition and Pressure Drop of Fin-and-tube Heat Exchangers

Experimental Investigation on Particle Deposition and Pressure Drop Characteristics of Slit Fin-and-tube Heat Exchanger

New Experimental Correlations for the Mass Transfer of a High-efficiency Packed-type Dehumidifier

Effect on Particle Deposition Characteristics and Air-side Pressure Drop of Fin-and-tube Heat Exchangers under Dehumidifying Conditions

Related Author

Zhang Min

Wang Ruixiang

Jia Tao

Zhuang Dawei

Ding Guoliang

Hu Haitao

Zhan Feilong

Tang Jiajun

Related Institution

Beijing Municipality Key Laboratory of HVAC & R, Beijing University of Civil Engineering and Architecture

Hebei Electric Power Design & Research Institute

Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University

Department of Building Services Engineering, The Hong Kong Polytechnic University

Institution of Refrigeration and Cryogenics, Shanghai Jiao Tong University

Address：10/F, Yindu Mansion, 67 Fucheng Road, Haidian Dist, Beijing, China Postal code：100142
Tel：010-68711412 Email：editor@car.org.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰