Experiment on Axial Force of Rotors in Twin-screw Refrigeration Compressor

Hou Feng; He Yongning; Yang Cai; Yu Zhiqiang; Xing Ziwen

doi:10.3969/j.issn.0253-4339.2020.06.125

您当前的位置：

首页 >

文章列表页 >

Experiment on Axial Force of Rotors in Twin-screw Refrigeration Compressor

更新时间：2024-12-12

- Experiment on Axial Force of Rotors in Twin-screw Refrigeration Compressor
- Journal of Refrigeration Vol. 41, Issue 6, (2020)
- 作者机构：
  
  1. 郑州轻工业大学能源与动力工程学院
  2. 郑州轻工业大学信息化管理中心
  3. 冰轮环境技术股份有限公司
  4. 西安交通大学能源与动力工程学院
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0253-4339.2020.06.125
  CLC：
- Published：01 January 2020
- 稿件说明：
移动端阅览
Hou Feng, He Yongning, Yang Cai, et al. Experiment on Axial Force of Rotors in Twin-screw Refrigeration Compressor[J]. Journal of refrigeration, 2020, 41(6).
DOI：

Hou Feng, He Yongning, Yang Cai, et al. Experiment on Axial Force of Rotors in Twin-screw Refrigeration Compressor[J]. Journal of refrigeration, 2020, 41(6). DOI： 10.3969/j.issn.0253-4339.2020.06.125.

摘要

为了提高双螺杆压缩机运行的可靠性，本文针对双螺杆制冷压缩机转子轴向力进行了实验研究。研究了不同运行工况(35℃ /0 ℃、30 ℃ / －15 ℃、40 ℃ / －40 ℃)以及内容积比(26、32、40)下转子轴向力的大小以及变化趋势，使用均压模型以及扇形模型对转子端面轴向力进行了计算，并将计算的端面轴向力与实验数据进行对比。研究结果表明:相比于均压模型，扇形模型的端面轴向力计算结果更为准确，而均压模型适合于内容积比较大的工况范围；内容积比对轴向合力的影响主要集中在对转子端面轴向力，且端面轴向力要大于气体轴向力约50％。

Abstract

In this study

an experimental study of the axial force on twin-screw compressor rotors was conducted to improve operating reliability. The variations in the axial force under different operating conditions and built-in volume ratios were investigated. Furthermore

the axial force of the end face was also calculated by employing the mean pressure model and sector pressure model and was compared with the experimental results. It was concluded that the sector pressure model is more accurate for predicting the axial force on the rotors in comparison with the mean pressure model. However

the mean pressure model was more accurate under operating conditions with a large built-in volume ratio. Moreover

the built-in volume ratio was found to have a larger influence on the axial force of the rotor end face than that on the rotor helical surface

where the former is approximately 50% larger than the latter.

关键词

Keywords

references

Views

2013

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Operating Characteristics of Twin-Screw Refrigeration Compressor with Different Refrigerants Based on the Semi-Empirical Model

Development Status of Compressor Technology for Medium and Large Capacity Industrial High-Temperature Heat Pumps

Development Status of Compressor Technology for Medium and Large Capacity Industrial High-temperature Heat Pumps

Operating characteristics research of twin-screw refrigeration compressor with different refrigerants based on the semi-empirical model

Related Author

Zhu Shizhe

Xing Ziwen

Ren Dawei

Wang Chuang

Chen Zheyin

Li Yanpeng

Ma Kai

Xing Ziwen

Related Institution

Moon Environment Technology Co., Ltd.

Suzhou Academy, Xi'an Jiaotong University

西安交通大学能源与动力工程学院

西安交通大学苏州研究院

西安交通大学能动学院

Address：10/F, Yindu Mansion, 67 Fucheng Road, Haidian Dist, Beijing, China Postal code：100142
Tel：010-68711412 Email：editor@car.org.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰