Experimental Research on CO2 Pool Boiling Heat Transfer outside Horizontal Tube

Liu Shengchun; Li Lan; Ning Jinghong; Liu Jiangbin

doi:10.3969/j.issn.0253-4339.2015.02.034

您当前的位置：

首页 >

文章列表页 >

Experimental Research on CO2 Pool Boiling Heat Transfer outside Horizontal Tube

更新时间：2024-07-18

- Experimental Research on CO2 Pool Boiling Heat Transfer outside Horizontal Tube
- Journal of Refrigeration Vol. 36, Issue 2, (2015)
- 作者机构：
  
  天津商业大学天津市制冷技术重点实验室
- 作者简介：
- 基金信息：
- DOI：10.3969/j.issn.0253-4339.2015.02.034
  CLC：
- Published：2015
- 稿件说明：
移动端阅览
Liu Shengchun, Li Lan, Ning Jinghong, et al. Experimental Research on CO2 Pool Boiling Heat Transfer outside Horizontal Tube[J]. Journal of refrigeration, 2015, 36(2).
DOI：

Liu Shengchun, Li Lan, Ning Jinghong, et al. Experimental Research on CO2 Pool Boiling Heat Transfer outside Horizontal Tube[J]. Journal of refrigeration, 2015, 36(2). DOI： 10.3969/j.issn.0253-4339.2015.02.034.

摘要

对自然工质CO2在不同沸腾压力下的光管、机械加工表面强化管（Turbo-EHP）水平单管管外电加热池沸腾进行了实验研究。从核态沸腾的角度分析了光管、强化管管外沸腾换热系数随热流密度、沸腾压力的变化规律

通过对热流密度在10~50 kW/m2、蒸发压力在2~4 MPa范围内的换热数据分析拟合得出光管时CO2在该范围下的换热关联式，拟合关联式的计算值和实验值的误差在 ± 8.73%以内。新的拟合关联式的计算值与已有关联式的预测值的偏差在 ± 15%之内。在热流密度范围内强化管的强化倍率在1.50 ~ 1.72之间。研究结果对进一步深入研究CO2池沸腾换热及蒸发器的设计具有指导意义。

Abstract

The pool boiling heat transfer of natural refrigerant CO2 outside single horizontal tube is investigated experimentally under different boiling pressure. Smooth tube and enhanced tube(Turbo-EHP) are taken as the single horizontal tube with electrical heating. The relationship of boiling heat transfer coefficient along with the heat flux and the boiling pressure is analyzed

and the heat transfer correlation of smooth tube under heat flux of 10~50 kW/m2 and boiling pressure of 2~4 MPa is obtained. The maximum error is 8.73% when the experimental values are compared with fitting formula. Compared with other existing heat transfer correlations

the new fitting formula of CO2 is matching very well

and the maximum error is 15%. In the range of experimental heat flux and boiling pressure

the overall heat transfer coefficients of the enhanced tube are higher than that of the smooth tube

and its enhancement factors varies from 1.50 to 1.72. This paper makes useful exploration of CO2 pool boiling heat transfer and will benefit the design of evaporator.

关键词

Keywords

references

Views

2407

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of Tube Surface Structure on Performance of Pool Boiling Heat Transfer on Horizontal Single Tube

Dryout Characteristics of the CO2 Heat Transferof Evaporation Process in Horizontal Micro-tubes

Application of Three-Dimensional Distorted Tube Energy Recovery Device in Summer Air-Conditioning Fresh Air System

High-temperature CO2 Transcritical Heat Pump with Optimized Tube-in-tube Heat Exchanger

Study on the Effect of Foamed Metal Copper Filling Ratio on the Enhanced Heat Transfer Mechanism of Phase Change Materials

Related Author

Liu Pengpeng

Huang Lihao

Chen Jianhong

Tao Leren

Zhou Zhuo

Huang Jiayu

Li Jike

Liu Jianhua

Related Institution

School of Energy and Power Engineering, University of Shanghai for Science and Technology

Shanghai Key Laboratory of Muliphase Flow and Heat Transfer in Power Engineering

Shanghai First Refrigerating Machine Co

Institute of Refrigeration and Cryogenic Engineering, University of Shanghai for Science and Technology

Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering

Address：10/F, Yindu Mansion, 67 Fucheng Road, Haidian Dist, Beijing, China Postal code：100142
Tel：010-68711412 Email：editor@car.org.cn
Technical support is provided by Beijing Founder electronics co., LTD 京ICP备09064830号-19 京公网安备11010802024621
It is recommended to read the content of this site in Chrome&IE9+. Please switch to extreme mode in browser 360.
Cookies We use cookies to help provide and enhance our service and tailor content. By continuing, you agree to the use of cookies.

⁰