| 摘要: |
| 热力膨胀阀在不同工况下的流量特性是影响制冷系统性能的重要因素，因此需要对热力膨胀阀进行制冷剂实流检测。本文研制了制冷量范围为1.7~10 kW的热力膨胀阀容量测试台。该测试台以“膨胀阀进出口的压力值”为测试条件，避免了阀前高压部分设备流动阻力的差异对测量结果的影响。系统的流量测量不确定度为0.5%，控温精度为±0.5 ℃。在标准工况下取额定容量5.5 kW的H型热力膨胀阀的性能进行了测试，根据温度-开度、开度-流量、温度-流量关系特性分析得到在热力膨胀阀工作区域内，其温度与流量基本成线性比例关系。根据热力膨胀阀增益和滞环的定量分析，判别热力膨胀阀的性能优劣。 |
| 关键词: 汽车空调 热力膨胀阀 开度 流量 |
| DOI： |
|
|
| 基金项目: |
|
| Development of Testing System on Thermal Expansion Valve Capacity |
| Yan Jiliang,Wang Yugang,Geng Liping,WangQingping |
| (College of Metrology and Measurement Engineering, China University of Metrology;Testing Center for Quality, Petro China Tarim Oilfield Company) |
| Abstract: |
| Thermal expansion valve’s flow characteristic under different conditions is one of the most important factors affecting refrigeration system performance. So it is necessary to detect the actual refrigerant flow of thermal expansion valve. A thermal expansion valve test-bench was developed and its range of refrigerating capacity was 1.7~10 kW. In the system, in order to avoid the influence of flow resistance difference of the high pressure part on the measured results, inlet pressure of expansion was treated as the testing condition. The uncertainty of flow measurement is 0.5% and temperature control accuracy is ±0.5 ℃. Performance of a 7 kW capacity H-type thermal expansion valve was tested in the standard condition, and the property of flow-opening, temperature-opening, flow-temperature was acquired and analyzed. In the thermal expansion valve’s work range, the flow increases linearly with the increase of temperature. Through the quantitative analysis of thermal expansion valve's gain and hysteresis, the performance of thermal expansion valve is judged. |
| Key words: automobile air-conditioning thermal expansion valve opening flow |
