引用本文:[点击复制]
[点击复制]
【打印本页】 【在线阅读全文】【下载PDF全文】 查看/发表评论下载PDF阅读器关闭

←前一篇|后一篇→

过刊浏览    高级检索

本文已被:浏览 1818次   下载 2546 本文二维码信息
码上扫一扫!
滚动转子式压缩机吸气状态与排气温度的实验研究
杨丽辉,陶乐仁,陶宏,范立娜
0
(上海理工大学;联合技术环境、控制和安防;上海日立电器有限公司技术中心)
摘要:
利用变频滚动转子式压缩机实验台,研究了压缩机吸气带液对系统性能和排气温度的影响,以寻求降低压缩机排气温度有效、安全的方法。结果表明了在大部分空调工况和运转频率下,当吸气干度约为0.95~0.98时,系统制冷量和COP达到最大值,且压缩机的排气温度显著降低至吸气压力对应的饱和等熵压缩排气温度。考虑到运行的安全性,吸气干度合适的范围为0.95~0.98。
关键词:  排气温度  吸气干度  滚动转子式压缩机  实验研究
DOI:
    
基金项目:博导类联合基金(3312301001)资助项目。
Experimental Study on Suction Refrigerant State and Discharge Temperature for Rolling Piston Compressor
Yang Lihui,Tao Leren,Tao Hong,Fan Lina
(University of Shanghai for Science and Technology;UTC Climate|Controls|Security;Shanghai Hitachi Electrical Appliances Co., Ltd.)
Abstract:
Influence of suction refrigerant state on system performance and discharge temperature was carried out through a variable speed rolling piston compressor test stand. Results show that under the most air-conditioning conditions and the most operating frequencies, when suction vapor quality is about 0.95~0.98, system capacity and COP will reach peak value, and discharge temperature will be effectively decreased to the corresponding theoretical discharge temperature of isentropic compression process. Considering running safety, the appropriate suction vapor quality should be among 0.95~0.98.
Key words:  discharge temperature  suction vapor quality  rolling piston compressor  experimental study

用微信扫一扫

用微信扫一扫